80 amp MPPT Charge Controller for 12,24,48 VDC.  Works the same as an MX60 but has a rating of 80 amps.

The FLEX max80 improves performance over normal solar controllers. Real time active Maximum Power Point Tracking (MPPT) system ensures that your solar array is operating at its peak power point regardless of age, shading or environmental conditions. Systems with large solar arrays benefit thanks to the FLEX max 80’s 80 amp DC output current rating for 12, 24 or 48 VDC systems - all with just one product model!

Real wiring flexibility of your solar array is finally here because of the FlEX max 80’s wide range DC input, up to 150 VOC (stops working at 140 VOC). The ability to step-down a high voltage solar array to a low voltage battery can save you money by reducing the size of wire required and making the installation simpler and faster. The smart multistage recharging process ensures your batteries are recharged efficiently and gently to prolong battery life and achieves the highest possible performance.

All of the FLEX max 80’s status information is displayed on the large built-in 3.1" (8 cm) backlit LCD screen. Monitoring your solar array’s performance is easy as the data logging system automatically records the last 64 days of system operation.

You can use this product with our 230/60vdc 60amp transformer/rectifier pack so you can plug in your 230 vac gen-set for backup charging when the sun does not shine.

This ways you get the benefit of a great MPPT solar regulator and the ability to charge from a low cost gen-set (without spiking your house appliances – a common problem with inverter/charger combined units).

We recommend a FLEX max 80 or a MX60 (depending on your needs), transformer/rectifier pack and a 3kW Invertek inverter as a low cost and rugged solution to your regulation, inverter and backup charging issues.